Palsonic PVP100 manual Troubleshooting, No Picture

Page 39

Troubleshooting

Please read the user's manual carefully before using the unit. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact our company or the technical service centre authorised by us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it may cause electric shock.

NO POWER

Check whether the power or battery is connected well.

NO SOUND BUT HAVE PICTURE

Check whether you have turned down the volume.

NO PICTURE

Check whether the TFT Power switch is chocked in the hole.

Check whether the OUT/IN switch is set as IN, and no signal input from CVBS jack.

ABNORMAL DISPLAY OF THE COLOUR OR BRIGHTNESS

Please setup the player in STOP mode with your remote controller, open the menu, select the defaulted setup to resume.

BLACK AND WHITE POINTS IN SCREEN

The LCD monitor made by high precision technology, it is normal for 0.01% of the Pels to appear black or white points.

REMOTE IS INSENSITIVE OR DOES NOT WORK

Check the battery of remoter and make sure that they are to be powerful and good conductivity.

Direct the remote controller to the IR sensor of the player.

Check whether there are some obstacles between the remoter and IR sensor.

THE PLAYER TURNS OFF AUTOMATICALLY

Under the screen saver mode, if there is no operation in 10 minutes, to save the power, the player will turn off automatically.

CAN NOT WORK WITH THE BATTERY

Power of the battery is insufficient. Try to unload the battery and connect the adaptor to the player, then put on the battery to charge.

38

Image 39
Contents Users Guide Contents Remark Safety PrecautionsCleaning Important Safety InstructionsOverloading Panel Instruction Input and Output Panel Instruction Panel Operation Instruction Panel Operation Instruction Panel Operation Instruction Power Supply Power Supply PBC ON/OFF Remote ControllerVideo Input Connect to TV SetPlayback in Car Ntsc System SettingTV Display setup TV Type setupOSD Language setup Angle Mark setupCaption setup Spdif Output setupScreen Saver setup Subtitle setup Audio setupParental Control setup Disc Menu setupDefault setup Password setupRemote Controller Operation Press Play button again to resume 32X Play Prev Next Memory REP-TRACK REP-ALL Repeat OFF Angle Subtitle MP3 Playback Press Button To select track Kodak Picture CD Playback Introduction of Kodak Picture CDGeneral function Zoom Function Image RotationDigest function Jepg Playback JEPG/WMA Playback Hints for Jpeg Picture CD makingWMA Playback No Picture TroubleshootingTFT LCD SpecificationsAttachment Operate with the remote controller correctly Using Remote ControllerPage Palsonic Customer Service Telephone