12-1607.fm Page 6 Friday, July 9, 1999 9:32 AM
Notes:
•To prevent unnecessary drain on the backup battery, plug in the AC power cord before you install the battery.
•The clock’s display does not light while operating from battery backup power, but the clock keeps time for up to 8 hours.
•If the display flashes after a power failure, the battery is too low to run the clock. Replace the battery and reset the clock.
1.Press the latch on the battery compartment cover and slide the cover in the direction of the arrow and remove it.
2.Snap the battery into the bat- tery terminals. Then put the battery in the compartment.
6