Radio Shack PRS-102 UHF owner manual Installing the Antenna

Page 11

19-902.fm Page 11 Tuesday, August 3, 1999 2:03 PM

3.With the battery label facing up, align the battery pack and radio’s battery contacts. Apply slight pressure to the bottom of the battery pack and press it into the compartment, as shown.

4.Slide the battery cover back into place and lock it with the latches.

To remove the battery pack, unlock the compartment and remove the cover. Then turn the transceiver face down and gently tap the battery pack into your palm.

INSTALLING THE ANTENNA

To install the antenna, place the threaded end of the antenna over the antenna connector on top of the tranceiver and screw it into place.

11

Image 11
Contents PRS-102 UHF Fm Page 2 Tuesday, August 3, 1999 203 PM Channel Frequency FeaturesFm Page 4 Tuesday, August 3, 1999 203 PM Contents FCC License Required FCC RegulationsFCC Rules Part 95, Subpart a Fm Page 8 Tuesday, August 3, 1999 203 PM Fm Page 9 Tuesday, August 3, 1999 203 PM Preparation Installing and Removing the Battery PackInstalling the Antenna Charging the Battery Pack Fm Page 13 Tuesday, August 3, 1999 203 PM Checking the Battery Power Attaching and Removing the Belt Clip Connecting Audio Accessories Operation Operational Hints Ctcss Option WHY USE CTCSS?Setting the Ctcss Tone Up Position Down Position Ctcss Freq Ctcss Optional Accessories Possible Symptom Problem Solution TroubleshootingFm Page 26 Tuesday, August 3, 1999 203 PM Fm Page 27 Tuesday, August 3, 1999 203 PM Fm Page 28 Tuesday, August 3, 1999 203 PM Maintenance Fm Page 30 Tuesday, August 3, 1999 203 PM General SpecificationsRadioShack