Placement
Using as a surround speaker
Enhance the sensation of being at a live performance by giving
Place these speakers so that their height is 1 meter higher than that of the listener’s ears.
The speaker cabinet is made of wood and sensitive to extreme temperatures and humidity. Avoid placing the speaker system in locations subjected to direct sunlight or in humid places such as near an air conditioner, bathroom, or kitchen.
Installing on the wall
If the speakers are to be
Attach the supplied cushioning pads as shown to
Cushioning pads
Key hole slot
Cushioning pads
Installation using
The surround speaker bottom and rear are equipped with screw holes so that you can attach
Note:
When attaching an accessory item to a speaker, be careful of the length of the screws used. Use only screws that provide the required strength with a screw length between 3 and 11 mm.
5mm
3 - 11mm
M5 screw
Attaching and detaching the speaker grilles
This speaker system uses detachable grilles. Use the following method to attach or detach the grilles.
1.While holding the bottom edge of the speaker grille with your both hands, pull it gently toward you to remove the bottom of the grille.
2.In the same way, gently pull the upper edge of the speaker grille toward you to remove it from the main unit.
3.To replace the grill, push the projections at the corners into the grille plug holes on the speaker cabinet.
RemovalReplacement
Use with a TV set
In general, Braun tubes used for color television sets, etc. are extremely sensitive and can be affected even by the magnetism of the earth. If a speaker system is used near them, therefore, discoloration or distortion of pictures will occur. To allow use with color television sets, etc., this speaker system is provided with magnetic shielding.
Even so, discoloration may still result, depending on the installation environment. If discoloration occurs, turn off the power of the television set, wait for 15 to 30 minutes and then turn it on again. This activates the
Speaker care
Your Onkyo speakers are finished with a high quality covering that serves to protect the wood speaker cabinet.
Wipe the cabinet periodically with a dry,
The covering may be cleaned with a soft cloth moistened with water and a mild soap. Avoid the use of furniture polishes or harsh cleansers. Use a soft brush or hand vacuum cleaner to remove dust and lint from the grille material.
Natural wood finished cabinets
The cabinets are finished with a natural wood surface. They have a unique wood grain pattern. Your cabinets have their own raw beauty and uniqueness which is unlocked from the tree; this is depicted by the