Onkyo SKF-3600 instruction manual Connections, Precaution on use

Page 3

Connections

Be sure to turn off your amplifier before connecting the speaker system. Connecting it while the amplifier is on may result in damage to the amplifier or the speaker system.

The nominal impedance of this speaker system is 8. Use only amplifiers capable of handling this imped- ance.

Use the supplied speaker cables to connect between the speaker’s input terminals and the amplifier’s speaker terminals as illustrated below.

Be sure to connect the Right and Left speakers with the amplifier’s corresponding speaker terminals. Also, be sure that you are connecting the speaker’s positive (+) and negative (–) input terminals with the amplifier’s corresponding positive and negative speaker terminals. Otherwise, undesirable sound field or impaired bass-range reproduction will result.

Before turning on the amplifier’s power switch, pull lightly on the speaker cables to ensure that they are connected securely.

To prevent damage to circuitry, never short-circuit the positive

(+) and negative (–) speaker wire.

SKF-3600

SKF-3600

Front right

Front left

speaker

speaker

 

SKC-3600

Center speaker

Precaution on use

This speaker system can handle the specified input power when it is used for ordinary music reproduc- tion. If the following abnormal signals are fed to the speaker, however, an overcurrent may flow in the internal circuits, causing burning or breakage of the wires even if the input power is below the specified rating.

1.Noise produced when FM station is not tuned in

2.Sound produced when fast-forwarding cassette tape deck

3.High-frequency sound generated by an oscillator, an electronic musical instruments, etc.

4.Oscillating amplifier signals

5.Special test signals produced by audio checking CD, etc.

6.Sound produced when connecting or disconnect- ing audio connection cables (Always turn off the amplifier’s power before connecting or discon- necting cables.)

7.Howling when a microphone is used

Do not place magnetic objects such as screwdrivers and iron parts near the speaker system since they use speakers with strong magnets. Otherwise, the objects may be attracted, causing injury or damaging the dia- phragm.

Red FRONT

SPEAKERS

A B

LL

R

R

SURROUNDCENTER

SPEAKERSSPEAKER

L

R

SURROUND BACK

SPEAKER

White

SKM-3600

SKM-3600

Surround right

Surround left

speaker

speaker

Both SKC-3600 and SKM-3600 come with SKS-3600.

1. Strip the insulation of speaker cables, and twist the core wires tightly.

2. While pressing the lever, insert the wire into the hole, and then release the lever.

3. Make sure that the terminals are gripping the core wires, not the insulation.

3

Image 3
Contents SKF-3600 Supplied accessories PlacementUsing the included speaker bases Connections Precaution on useSpeaker care Use with a TV set or computerSpecifications