Onkyo DV-SP501 instruction manual Learning a pre-programming code, Controlling a TV

Using the RC-524DV Remote controller with TVs from Other Manufacturers (North American model only)

Learning a pre-programming code

	ON	STANDBY
			OPEN/
			CLOSE
		REPEAT	A-B RANDOM
			PLAY MODE
	1	2	3
Numbers			DISPLAY
	4	5	6
			DIMMER

7 8 9

0CLEAR

TOP MENUMENU

		/ / /
ENTER		ENTER
RETURN	SETUP
AUDIO ANGLE SUBTITLE ZOOM
TV CONTROL
TV/VIDEO	CHANNEL
ON/		TV CONTROL
STANDBY	VOLUME

ON/

STANDBY

RC-524DV

You can make RC-524DV remote controller to operate a TV from other brand than Onkyo by storing the pre-pro- gramming code of the brand in the RC-524DV.

5	Press some operation buttons
	for the component that you want
	to operate to check if the system
	operates properly.
	If the system operates properly, the
	code is correct. If the component does
	not operate properly, return to step 2.

Notes:

•With some brand’s components, some buttons may not work correctly.

•If more than one code is given in the table, try the code one by one until you reach the code for your compo- nent (i.e. if the first code does not work, then try the next).

•The code can be retained by changing the batteries within 1 minute. If the code is lost, store the pre-pro- gramming code again.

Controlling a TV

1 ON/ Press ON/STANDBY to turn on

STANDBY the device.

1	Find the 3-digit number for the
	brand name of the component
	that you want to operate in the
	table on page 55.
2	Turn on the TV that you want to
	operate.

2

CHANNEL

VOLUME

Press the desired operation but- ton.

+: Changes the TV channel upward.

–: Changes the TV channel down- ward.

: Increases the TV volume.

3 ON/

STANDBY

ENTER

While holding down the ON/ STANDBY on the RC-524DV that you want to program, press ENTER, and then release both buttons.

(Make sure you press ON/STANDBY before ENTER.)

TV/VIDEO

:Decrease the TV volume. TV/VIDEO: Switches the TV/VCR

inputs.

4		Within 10 seconds, enter the 3-
		digit code number.
1	2	3

4 5 6

7 8 9

0

54