To Pause Recording
To pause
Press the REC button during recording. ,“PAUSE” on the display and the recording lamp will flash.
To resume recording
Press the REC button again. , Recording will resume at the point of interruption.
Note
The recorder will enter Stop mode if it has been left paused for 10 minutes or longer.
Locating the beginning of the file
Press the 9/+ or 0/– button in Stop mode,* playback, fast playback, or playback pause.
Each time you press the 9/+ or 0/– button, the recorder will locate the beginning of the next or previous file.
* When folder S is selected, you cannot locate the beginning of the file in Stop mode. | |
Notes | |
• | Even if you press the 9/+ or 0/– button during playback or fast playback, the recorder |
| will continue playback in the same playback mode. |
• | When you select folder A or B, you can locate the beginning of each file continuously by |
To check the remaining recording time
Press the DISPLAY button while the recorder is stopped.
To check the total number of files recorded in the folder
Press and hold the STOP button while the recorder is stopped. The total number of files recorded in the folder appears on the display.
*In the case of folder S, the number of the date subfolder is not included.
aCurrent folder bTotal number of
files recorded in
the current folder* cRemaining
recording time
pressing and holding the 9/+ or 0/– button while in Stop mode. During operation, “SKIP” |
flashes on the display. |
Erasing from Folder A or B
Erasing One File at a Time
1 Press the MENU/FOLDER button to select folder A or B.
Playing Back
1
2 Press the 9/+ or 0/– button to select the file to play back. If you select folder S, select the desired date subfolder.*
*When you select the desired date subfolder, it is useful to press and hold the 9/+ or 0/– button for 1 second or longer. The recorder locates the next date subfolder that contains recorded files.
3 Press the PLAY button to start playback.
The playing time** appears on the display.
**Each time you press the DISPLAY button during playback, the
display changes as follows: |
| |
Playing time → Remaining playing time → Recording date of | aCurrent folder | |
the file → Recording time of the file → Playing time . . . | bCurrent file number | |
4 Use the VOLUME control to adjust the volume to | ||
cPlaying time** | ||
| ||
your liking. |
|
Note
When you play back a file in the date subfolder without choosing a specified file, the recorder will play back all the files in the 
selected date subfolder from filename “001.” When you play MIN 
back a file immediately after recording the file, only the most recently recorded file will be played back.
MAX
Canceling Playback
To stop
Press the STOP button. , The recorder returns to the beginning of the file being played.
To pause
Press the PLAY button. ,“PAUSE” flashes on the display.
To resume playback
Press the PLAY button again. ,Playback will resume at the point of interruption.
Note
The recorder will enter Stop mode if it has been left paused for 10 minutes or longer.
Playback Functions
| Operation | How to cancel |
|
|
|
Fast Playback | Press and hold the PLAY | If you press and hold the PLAY |
| button for 1 second or | button for 1 second or longer |
| longer while playing a | again, the recorder will resume |
| file. | normal playback. |
|
|
|
Fast Forward | Press and hold the 9 | When you release the 9 button, |
(8) | button while playing a | the recorder will resume normal |
| file. | playback. |
|
|
|
Rewind (7) | Press and hold the 0 | When you release the 0 button, |
| button while playing a | the recorder will resume normal |
| file. | playback. |
|
|
|
•Fast playback is approximately 30% faster than normal playback.
•When fast playback of a file is over, the recorder will play back the next file at normal speed. If you once press the STOP button and start playback again, the recorder will play back files in normal speed as well.
•No sound is heard from the
•The end of the file is located by pressing and holding the 9 button during fast forwarding. The recorder will pause at the end of the file. If you do not release the 9 button, the recorder will continue fast forward.
•The beginning of the file is located by pressing and holding the 0 button during rewinding. The recorder will pause at the beginning of the file. If you do not release the 0 button, the recorder will continue rewinding.
2 Press the 9/+ or 0/– button to select the file to be erased. 3 Press the ERASE button.
The file number flashes, then alternatively “ERASE” and “YES” appear on the display for 8 seconds.
4 Press the ERASE button again.
The file is erased.
Sequential file numbers are reassigned automatically.
Notes
•You can erase a file while in playback or playback pause.
•If you leave the recorder untouched for 8 seconds or longer before you press the ERASE button in step 4, Erase mode will be canceled, and the recorder will enter Stop mode.
Erase All Files from a Folder
1 Press the MENU/FOLDER button to select the folder from which you want to erase all files.
2 Press and hold the ERASE button for 2 seconds or 
longer.
The folder name and “ALL” flash, then alternatively
“ERASE” and “YES” appear on the display for 8 seconds. 
3 Press the ERASE button again.
All files in the selected folder are erased simultaneously.
Note
If you leave the recorder untouched for 8 seconds or longer before you press the ERASE button in step 3, Erase mode will be canceled, and the recorder will enter Stop mode.
Erasing from Folder S
Erasing One File at a Time in a Date Subfolder 1
2 Press the 9/+ or 0/– button to select the date subfolder.
3 Press the PLAY button.
The recorder starts to playback all the files in the selected date subfolder.
4 During playback, press the 9/+ or 0/– button to select the file to be erased.
5 Press the STOP button.
6 Press the ERASE button.
The file number flashes, then alternatively “ERASE” and “YES” appear on the display for 8 seconds.
7 Press the ERASE button again. The file is erased.
Sequential file numbers are reassigned automatically.
Note
If you leave the recorder untouched for 8 seconds or longer before you press the ERASE button in step 7, Erase mode will be canceled, and the recorder will enter Stop mode.