EN
1.Press ALARM to toggle between the alarm displays and select either alarm 1 or 2, for setting.
2.Press and hold ALARM to enter alarm setting mode.
The alarm setting will blink.
3. Press 
/ 
to change the settings. Press and
hold 
/ 
to speed through values.
4.Press ALARM to confirm.
5.The setting sequence is: Hour and minute.
NOTE
The alarm icon will appear on the display to show which alarm has been set:
ICON | MEANING |
/ | Alarm 1 / alarm 2 is set |
|
|
No icons | No alarm is set |
To activate / deactivate an alarm:
•Press AL ON / OFF to toggle between alarm 1 and 2, both alarms ON or OFF.
OR
•Press ALARM to select alarm 1 or 2 and then press AL ON / OFF.
To silence the alarm:
•Press SNOOZE, to silence it for 8 minutes. Press ALARM or AL ON / OFF to turn it off during the 8-
minute snooze time.
OR
•Press any key except SNOOZE to stop the alarm and
reset it to activate at the same time the next day. | 6 |
|
NOTE When the snooze function is activated, the alarm icon will flash.
PROJECTOR
When the projection unit is placed on the main unit it will automatically recharge its batteries and synchronize its time with the main unit.
To turn the projector ON / OFF when it is on the main unit:
Press PROJECTION on the main unit.
ICON | DESCRIPTION |
| The projection unit is out of |
| synch with main unit and is being |
| updated |
The projection unit has just been placed back on the main unit and it is checking to see if it recognizes the projection unit
The main unit
recognizes the projection unit and is charging it.
icon The main unit does not recognize disappears the projection unit. Adjust the from display position of the projection unit until
the icon becomes animated.
RM382P_M_EN_OP_REVISED1.indd 6
4/19/06 6:03:42 PM