EN
SET OR CHANGE THE CLOCK
1.Press SELECT to switch to the Clock Mode. The time will flash.
2.Press and hold SELECT for 2 seconds to enter the setting mode.
3.Select the
ALARM
When activated, the Beep Alarm starts quietly, then gradually becomes louder. It shuts off at two minutes. The LCD display lights up for the first 8 seconds.
SET ALARM
1. Press SELECT several times until the Alarm area flashes.
2.Press and hold SELECT for 2 seconds to enter the setting mode.
3.Select the hour and minute. Press UP or DOWN to change the setting. Press SELECT to confirm.
4.Press SELECT again when you are finished.
SNOOZE
Press the SNOOZE/LIGHT button the top of the unit to temporarily disable the alarm for 8 minutes. The alarm icon will blink while Snooze is activated.
8