C8314A Size: A4
Projection Alarm Clock
with Indoor Thermometer
Model: EW96
USER MANUAL
Thank you for your purchase of this Projection Alarm Clock. Please read these instructions carefully and keep the manual well for future reference.
The unit has a clear and
This product is designed to synchronize its date and time automatically once it is within range of the WWVB- 60 signal from the atomic clock in Fort Collins, Colorado.
11.BATTERY COMPARTMENT:
∙Accommodates 2 AA size batteries.
12.RESET key:
∙Press it to return all values to default values.
∙In case of malfunction, the unit may be required to reset.
13.°C/°F slide switch:
∙Slide it to switch between Celsius and Fahrenheit.
14.PROJECTION ON/OFF slide switch:
∙Slide it to turn on/off the projector.
15.180° FLIP key:
∙Press it to rotate the projected image by 180°.
16.RCC key:
∙In normal time mode, press it once to receive the RC signal for reception testing.
17.BATTERY DOOR
Note
1.During the setting period, press and hold “+” or
2.The time zone indicators are abbreviated as below: P=Pacific, M=Mountain, C=Central, E=Eastern.
ALARM TIME SETTING
1.In normal time mode, press “SET ALARM” key once to enter the alarm time setting mode.
2.Press “+” or
3.Press “SET ALARM” key to save and exit the setting mode. “ 
” indicates alarm is ON.
Normal time mode | Alarm time setting |
OVERVIEW
RECEIVER
1
3
2
LCD DISPLAY
1.Time zone
2.Low battery indicator
3.Signal reception indicator
4.Indoor temperature
5.Time
6.Alarm time & Date
1 |
|
|
|
| 5 | |
|
|
|
| |||
2 |
|
|
|
|
| |
|
|
| ||||
3 |
|
|
| ALARM | ||
|
|
| ||||
4 |
|
|
|
| 6 | |
|
|
|
|
| ||
OPERATING THE MAIN UNIT
Note
1.The alarm will be automatically turned on when you set the alarm time.
2.During the alarm time setting period, press and hold “+” or
USING ALARM FUNCTION
1.Follow the directions above to set the alarm time.
2.In normal time mode, press “ALARM ON/OFF” key once to display the current alarm time.
3.Press it again to turn alarm ON/OFF.
4 | 8 | |
5 | ||
9 | ||
6 | ||
| ||
7 | 10 | |
| ||
1213 | 14 | |
11 | 15 | |
| 16 | |
| 17 |
1.Projector:
∙Use it to project the time.
2.SNOOZE/LIGHT key:
∙In normal time mode, press it once to turn on the backlight for 5 seconds.
∙Press it to silence the current alarm when it is going and enter the snooze mode for 8 minutes.
3.LCD display:
∙Displays time, indoor temperature and date.
4.+ key:
∙In time setting mode, press it to increase the setting values.
5.SET CLOCK key:
∙In normal time mode, press it once to enter the normal time setting mode.
∙In normal time setting mode, press it to step the setting items. Press and hold it to exit the setting mode in any step.
6.- key:
∙In time setting mode, press it to decrease the setting values.
7.DC jack:
∙Plug DC adaptor to power the clock.
8.ALARM ON/OFF key:
∙Press it once to turn on the backlight and display the alarm time for 5 seconds.
∙Press it again to turn on/off the alarm.
9.SET ALARM key:
∙Press it once to turn on the backlight for 5 seconds, and press it again to enter the alarm time setting mode.
∙In alarm time setting mode, press it to step the setting items.
10.FOCUS turning knob:
∙Focus the projected image.
1.Remove the battery door and insert 2 new AA size batteries as per the polarity information marked on the battery compartment.
2.Press “RESET” key to restart the clock.
3.Slide “°C/°F” switch to select between Celsius and Fahrenheit.
4.Replace the battery door.
RECEPTION OF RADIO CONTROLLED TIME SIGNAL
The time and calendar are
When used for the first time (after inserting batteries or pressing “RESET” key), the clock will start to search for the atomic clock signal and the signal reception icon will flash for 5 minutes.
SIGNAL RECEPTION INDICATOR
The wave segment flashing means time signals are being received. The signal quality could be classified into 3 types:
No signal | Weak signal Excellent signal |
Note
1.The unit will automatically search for the time signal at 2:00am (3:00am or 4:00am is also available if the signal is not received at 2:00am), 8:00am, 2:00pm, and 20:00 each day.
2.Always place the unit away from electrical devices such as televisions, computers, telephones, etc.
3.Avoid placing the unit on or next to metal plates.
4.If possible, place the unit next to a window. Signal reception is greatly decreased when located in closed areas like basements or metal buildings.
5.Do not start reception in moving vehicles or trains.
TIME AND CALENDAR MANUAL SETTING
If you are out of reach of the Radio Controlled sensor or if the reception is not reachable, the time and calendar can be set manually. As soon as the signal of sensor is received again, the clock will automatically synchronize with the exact time and calendar.
1.In normal time mode, press “SET CLOCK” key once to enter the time setting mode.
2.Press “+” or
3.Press “SET CLOCK” to confirm. The setting order is:
4.Press “SET CLOCK” key to save and exit the setting mode.
12/24 Hr setting | Time setting | Time zone setting |
MD/DM setting | Year setting |
TO SILENCE THE ALARM
1.Press “SNOOZE/LIGHT” to silence the alarm for 8 minutes. The “ 
” will be flashing.
2.Press any other key to turn the alarm off and activate it again after 24 hours.
3.If no key is pressed within 120 seconds, the alarm will be turned off and be activated again after 24 hours.
USING THE PROJECTOR
Slide the “PROJECTION ON/OFF” switch to turn on/ off the projection light. The projection light must be on a dark background and within
Note
1.Slide “PROJECTION ON/OFF” to turn on the projection function.
2.Press “SNOOZE/LIGHT” to turn on the projector for 5 seconds.
3.When using DC power adapter, the projector will be turned on all the time.
4.If the alarm is set to go off, the alarm icon “ 
” will be projected.
5.Press “180 FLIP” to rotate the projected image by 180°.
6.Turn “FOCUS” knob to focus the projected image.
BATTERY REPLACEMENT
If the low battery icon turns on next to time, replace the main unit’s battery with 2 new AA batteries.
Low battery indicator
Note
Attention! Please dispose of the used unit or batteries in an ecologically safe manner.