Input Connection Cover AD-S282H/HT models

Input Connection Cover (AD-S282H/HT models)

The loudspeaker includes a weather resistant cover for the input terminals. If using the cover, be sure to pass the wiring through the bushing nut, bushing, cover, and gasket before making connections.The input wiring cover is keyed to fit one way only! Be sure the keyed end is oriented toward the bottom of the loudspeaker cabinet. For proper sealing, we recommend #12 to #10 AWG (3.3 to 5.3mm2) stranded loudspeaker cable with a flat or twisted cross section. If using smaller gauge wiring, it may be necessary to use additional weather resistant compounds to achieve proper sealing of the wire entry points.

•Pass the wires through the wire cover/gasket, bushing, and nut. •Strip the wires and connect to barrier strip screw terminals.

•Slide the cover over the terminals and secure using the two machine screws provided.

•Ensure gasket is seated properly; tighten compression nut.

To assure weather-tight connections, make sure the input cover is installed with its keyed end toward the loudspeaker’s bottom, fits flush against the loudspeaker cabinet, all gaskets are properly placed, and has all hardware tightened suffi- ciently.

Bi-amp / Passive Mode Selector Switch (I-282H and AD-S282H models)

Before applying signal to the loudspeaker, ensure the BI-AMP / PASSIVE mode selector switch is set to the appropriate position. Use a coin or flat-tipped screwdriver to change the switch position.

BI-AMP

Bi-amp mode requires pre-processing of the signal before the loudspeaker so that low-frequency signal only is connected to the LF terminals, and high-frequency only signal is connected to the HF terminals. The internal crossover network is bypassed completely when the switch is set to BI-AMP.

PASSIVE

Input connection cover assembly

Mode selector switch

Passive mode utilizes the loudspeaker’s internal crossover network and requires a full-range signal be applied to the PASSIVE terminals. Do not use the terminals marker HF when using the loud- speaker in passive mode.

Set the mode selector switch to the appropriate position before applying signal to the loudspeaker to avoid the possibility of damaging the drivers.

Transformer Tap Selector Switch (AD-S282HT

Transformer tap selector switch

Set the transformer tap selector switch to the appropriate setting before applying audio. To select the power level, align the tap selector switch slot with the desired power setting number. Use a coin or flat tip screwdriver to operate the switch.

70V Distributed Systems: use the right side markings. Select from 25, 50, 100, or 200 watts.

100V Distributed Systems: use the left side markings. Select from 50, 100, or 200 watts. the X position should not be used.

8 Ohm low impedance Systems: Set the tap selector switch to 8 ohms.

NOTE! 8 ohm setting should be used for 8 ohm audio systems only. Do not use 8 ohm setting when connecting the AD-S282T loudspeaker to 70V/100V distributed audio systems.

Set the tap selector switch to the appropriate position before applying signal to the loudspeaker to avoid the possibility of damage.

AD-S282HT, I-282H, AD-S282H specifications

The QSC Audio AD-S282H is an advanced, two-way loudspeaker designed to deliver exceptional performance in a variety of commercial audio applications. Known for its versatility, the AD-S282H is ideal for venues such as restaurants, retail establishments, and corporate facilities, where high-quality sound reinforcement is essential.

One of the standout features of the AD-S282H is its hybrid design, which combines both horizontal and vertical dispersion characteristics. This allows for a wide coverage area, ensuring that every listener experiences consistent audio quality regardless of their location in the space. The speaker is equipped with a proprietary Waveguide Technology that enhances sound dispersion, making it perfect for larger areas.

The AD-S282H features a robust 8-inch low-frequency driver and a 1-inch compression driver, capable of delivering a frequency response ranging from 55Hz to 20kHz. This wide frequency range allows the speaker to reproduce a full spectrum of audio, including deep lows and clear highs, which is crucial for various audio applications, from music playback to spoken-word events.

Another notable characteristic of the AD-S282H is its sturdy construction. Designed with durability in mind, the enclosure is made from high-quality materials that not only provide aesthetic appeal but also reduce the risk of damage during transportation and installation. The speaker is available in a standard black finish or white, allowing it to blend seamlessly into any environment.

The AD-S282H also features flexible mounting options, with integrated M10 rigging points for suspended applications and a built-in stand mount for portable setups. These options make it easy for users to customize their audio setup according to their needs.

In addition to its excellent sound quality and durability, the QSC Audio AD-S282H is designed with ease of use in mind. The speaker includes user-friendly connectors and robust terminal plates that simplify setup and connectivity.

In conclusion, the QSC Audio AD-S282H is a versatile, high-performance loudspeaker that combines advanced technologies with durable construction. Its impressive sound quality, broad coverage capabilities, and flexible mounting options make it a favorite among audio professionals seeking reliable, powerful sound solutions for various commercial applications.