Panasonic SC-PT565, SC-PT560 To adjust speaker level during play, Adjusting the subwoofer level

Adjusting the subwoofer level

You can adjust the amount of bass. The unit automatically selects the most suitable setting according to the type of playback source.

SUBWOOFER	SUB W 1#SUB W 2#SUB W 3
LEVEL	^---------------------------------------------------	}

-CH SELECT

≥To check the current setting, press [SUBWOOFER LEVEL].

≥The setting you make is retained, and recalled every time you play the same type of source.

Using Subwoofer Boost

Main unit only

You can enhance the subwoofer effect with strong bass.

SW BOOST indicator BST ON,------.BST OFF

SW	The SW BOOST indicator lights when
BOOST
	Subwoofer Boost is turned on.

Adjusting the speaker level

You can adjust the surround sound levels.

Preparation

≥Press [i ,` VOL] to adjust the volume to normal listening level.

≥Select “TEST TONE” from “SPEAKER SETTINGS” in “AUDIO” menu (➜ 26).

1 Enter test tone mode.

OK	e.g.	AUDIO - SPEAKER SETTINGS - TEST TONE
		SPEAKERS	TRIM LEVEL
		LEFT	− −
		CENTER	0dB
		RIGHT	− −
		SURROUND RIGHT	0dB
		SURROUND LEFT	0dB
		SET
		RETURN	EXIT : SETUP

Test tone will be output to each channel in the following order.

LEFT, CENTER, RIGHT,

SURROUND RIGHT, SURROUND LEFT

Adjusting the Speaker output level automatically: Auto speaker setup

(For [PT865] only)

The speaker level settings can be optimized to accommodate your room’s listening conditions so that you can enjoy the ideal surround sound experience. Using the supplied Auto speaker setup microphone, the main unit adjusts the balance of the front speakers, and the volume level of the center and surround speakers automatically.

Keep as quiet as possible during the Auto speaker setup. Loud voices, air-conditioning noise, or excessive wind may lead to incorrect settings. The speakers output loud test signals during setup.

Preparation
≥Turn off the television before starting the Auto speaker setup.
≥Make sure that “DVD/CD” is selected as the source and there are no
disc in the tray.
≥Ensure that headphones are disconnected.
≥For speakers with wireless system, ensure that the speakers are linked
to the main unit.	effects
e.g.
MIC VOL	soundUsing
SETUP
MIC

2	Adjust the speaker level for each
OK	speaker. (CENTER, SURROUND

RIGHT, SURROUND LEFT)

`6 dB to i6 dB

≥To exit the screen, press [SETUP].

∫To adjust speaker level during play

(Effective when playing 5.1-channel sound or when Dolby Pro Logic II is on.)

1 Press and hold [—CH SELECT] to select the speaker.

While the speaker channel is displayed, press [—CH SELECT].

1 While stopped

2 SETUP

-AUTO SP

(press and hold)

Connect the Auto speaker setup microphone.

≥Place the Auto speaker setup microphone at actual seating position. (At ear level when seated.)

Start the setup

≥The test signal is output from each speaker.

≥“COMPLETE” is displayed when Auto speaker setup is completed.

L #C #R #RS #LS #SW
^	----------------------------------------------}
≥You can adjust SW (Subwoofer) only if the disc includes a
	subwoofer channel and “ÎPLII” is not lit.

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

To cancel the setup

≥Press and hold [—AUTO SP] again. (“CANCEL” will be displayed when Auto speaker setup is canceled.)

[Note]

≥Audio settings will be restored to default if the Auto speaker setup is canceled.

RQTX0099

33