File Transfer

CONNECTING THE PLAYER TO YOUR COMPUTER / CHARGING THE BATTERY

To connect the player to your computer using the supplied USB cable:

PC USB

NOTE: Make sure you turn off the player before connecting to the PC.

Once connected the player's built-in battery will automatically begin charging. "READY" will show on the LCD.

When the battery is fully charged after approximately 2-3 hours on a

continuous charge, the battery icon shows . Please disconnect the player when charging is finished unless you are transferring files. The battery status indicators are as follows:

Low

Medium

Full

NOTE: When the low battery indicator shows , recharge the battery

as soon as possible. When the battery icon shows , this indicates the battery is about to run out of power within a few seconds minutes.

NOTE: Charging time may vary depending on the computer's USB usage status.

After connecting your MP3 player to the computer, the computer will detect and identify the device as a removable storage drive, allowing you to drag and drop all forms of data files between your computer and your player.

1.Double click the My Computer icon.

2.Double click the drive letter (i.e. Removable Disk (H:)) of your player assigned by the computer.

MP120 Eng R3 OP

8/25/04, 11:55 AM

¶´ƒ