VIII. Choosing Your Music Library
Once SoundBridge is successfully connected to your network and your server’s music sharing options are enabled, SoundBridge will automatically find your computer’s music server and detect any supported music libraries. After SoundBridge detects your music library, you will be prompted to choose the library you would like to access from a screen that looks something like this:
PLAY DAN’S MUSIC LIBRARY
PLAY FAVORITE RADIO STATIONS
SYSTEM CONFIGURATION
Navigate to your preferred library (in this case, “Dan’s music library”) and press Select. You will then see the “Main Menu,” where you can begin browsing and playing your music.
If instead you see the message [NO MUSIC LIBRARIES FOUND], your network is not connecting to your computer properly or your music library is not found. Please choose SYSTEM CONFIGURATION for troubleshooting your network connection. (Make sure your computer is turned on, your server is running, and music sharing is enabled.)
After you have successfully connected to your music library, SoundBridge will automatically connect to that library upon startup (provided you only have one music library to choose from). If you would like to return to the screen that allows you to choose your desired libraries manually, select the “CHANGE LIBRARY OR CONFIGURATION” option located at the bottom of SoundBridge’s Main Menu (accessible by pressing the Menu button).
Visit www.rokulabs.com/support for help if you are still having trouble connecting to your music library. Check to make sure your router is compatible with SoundBridge — a list of compatible wireless access points is available at www.rokulabs.com/support.
IX. Playing Music
You are now ready to begin playing music. Using your remote control, find a song you want to play, then press Play to play it immediately. See page 19, “Music Playback,” for more detailed instructions about browsing and playing music.
14