Using the Radio, Hints for Better Reception

USING THE RADIO

Turn the Mi3005 on by pressing the

Press the MODE button to select

Power button; the display will light.

the desired band (AM or FM).

Repeatedly		the TUNE
	press		Adjust the volume	as desired by
Up/Down/Skip	/	o buttons to	pressing the Volume Up/Down
manually advancethe frequency in			buttons.
the display up or down until the			For private listening, plug in
desired frequency appears.			headphones into the Headphones
For auto tuning, press and hold the			jack on the rear of the Mi3005. The
TUNE Up/Down/Skip n / o buttons			speakers will be disconnected
until the frequency in the display			when headphones are plugged in.
starts to scan and then release; the
tuner will search and then stop on
the next strong station it finds.
Repeat this step until the desired
frequency appears in the display.

Hints for Better Reception

AM–The AM ferrite bar antenna is located inside the unit. It may be necessary to turn the unit slightly so that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the position that provides the strongest reception for each of your favorite AM stations.

FM–Extend the FM antenna for best FM reception. 9