OPERATION (CONTINUED)
TO RECALL RADIO PRESETS | TO CHANGE A RADIO PRESET |
1 |
1 |
|
2 | 1 |
To recall a Radio Preset, press the RECALL button repeatedly until the desired Radio Preset appears in the display.
To change a Radio Preset, simply tune a radio station as described on the previous page, then press the RADIO SET button ❶; “MEMO” will blink in the display. Repeatedly press the RECALL button ❷ until the desired Radio Preset appears in the display, then press the RADIO SET button ❶ again to memorize.
NOTE: Once a radio frequency is selected, the display will revert to the time display after 10 seconds.
TO INSERT A CD
1 | 2 |
| 1 |
TO REMOVE A CD
1 |
Press the PLAY/PAUSE (
) button ❶ to turn the unit on. Open the CD compartment door by pressing the OPEN/CLOSE button ❷. Gently press a disc, label side up, onto the spindle and press the OPEN/CLOSE button ❷ again to close the CD compartment door.
Make sure the CD has stopped and open the CD compartment door by pressing the OPEN/CLOSE button. Hold the edge of the CD and pick it up.
IMPORTANT: The power must be on to open and close the CD Compartment door.
10