CD OPERATION (CONTINUED)
CD PLAYBACK NOTES:
• See page 15 for more information on MP3’s.
• When recording (“burning”) CDs, make sure the session is “finalized”, or simply record (“burn”) only one session. You can find more information in your recorder’s manual.
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “no disc” will appear in the display.
• If a disc is not recorded properly, “No File” will appear in the display.
• Playback will stop when you open the CD compartment, but it is not recommended to open the compartment before the STOP (■)/POWER OFF/▼ button is pressed.
• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin playback, depending on the number of tracks burned on the CD.
TO PAUSE A CD
1
During CD playback, if you wish to pause the disc momentarily, press the PLAY/PAUSE (®p)/POWER ON/▲ button. Playback stops but the disc continues to spin and the elapsed time will blink in the display.
2
Press the PLAY/PAUSE (®p) /POWER ON/▲ button again to release pause and resume playback. The sound returns and the elapsed time in the display stops flashing.
8