MPD8505CP O/M.QXD 8/12/02 11:24 AM Page 5
INSTALLATION
This CD player can be powered by either 2 “AA” batteries, a car or the provided AC adapter.
AC Operation
To operate the unit using AC power, connect the AC adapter (included) to the DC4.5V jack on the rear of the CD Player and to a wall outlet having 120V, 60Hz AC only. The batteries are automatically disconnected when the AC adapter is used.
CAUTION: Use only the AC adapter provided with this unit. Disconnect the adapter when not in use.
Battery Installation
Batteries need to be replaced when “LOW BATTERY” appears in the display. Fresh Alkaline batteries will last approximately 7 hours with ESP off, and 6 Hours with ESP on.
1.Open the battery compartment door on the bottom of the unit by sliding it out and then lifting it. To prevent the possibility of losing the cover, it cannot be removed.
2.Insert two (2) “AA” batteries (not included) according to the polarity diagram. Alkaline batteries are recommended for longer playing time.
BATTERY PRECAUTIONS
+
–
–
+
Follow these precautions when using batteries in this device:
1.Do not mix different types of batteries together (e.g. Alkaline and
2.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
3.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
5