CD OPERATION
TURNING POWER ON/OFF ADJUSTING THE VOLUME
1 |
1 |
1 |
Press the PLAY/PAUSE (®p)/POWER ON/▲ button 1 to turn the unit on. To turn the unit off, press the STOP (■)/POWER OFF/▼ button 2. The unit will automatically shut off if stopped (CD Standby) for one minute.
You can adjust the digital volume level from Minimum "MIN" to Maximum "MAX" by pressing the VOLUME UP/DOWN buttons.
NOTE: If there is no disc in the CD compartment or the CD door is open, you cannot adjust the volume.
PRESET EQUALIZER | BACKLIGHT |
1 |
Repeatedly press the PROG/EQ/ ENTER button to cycle through the preset EQ settings: NORMAL, CLASSIC, POP, JAZZ and ROCK. The CD must be playing to change the EQ setting.
When the unit is turned on, the backlight will light on for 10 seconds. Also, when the unit is on, press any buttons (except the CD Door OPEN switch) and the backlight will light for 10 seconds. If using an AC adapter, the backlight will always be lit when the unit is on.
Radio Sound Through a Home Audio System
By using a home audio connection cable (not included), superb radio sound can be heard through your home audio system. Before making any connections, turn off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side of the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the amplifier’s PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV or turn off the power to this unit.
6