CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be played.
1
While in the Stop mode, press the PROG./EQ/ENTER button. The track number will blink and
2 | 2 | 1 |
|
|
Select a track to be programmed using the Skip o 1 or n 2 button. If using a MP3 disc, see note below.
3 |
4 |
Press the PROG./EQ/ENTER button to memorize the track. Repeat steps 2 and 3 to program additional tracks up to a maximum of 24 tracks.
Press the PLAY/PAUSE (®p)/POWER ON/▲ button to begin program playback; “P” will appear in the display.
NOTES:
•Press and hold the MODE/CLEAR button for 2 seconds to clear the memory.
•MP3: If an MP3 CD is inserted, you will first select the directory number in step 1 followed by the PROG/EQ/ENTER button, and then the file/track number.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING THE MEMORY.
14