DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
EXTERNAL MEMORY CARD
TO AVOID DAMAGE, make sure the unit is off before inserting or removing the card.
1. Remove the top cover by pressing the Open button, then lifting the top cover up to remove it as shown in Figure 1.
2. Insert a SD/MMC memory card (not included) up to 1GB, label side facing the rear of the player, as shown in Figure 2.
3. Connect the USB cable as described previously.
4. Drag MP3 and WMA files into the SD/MMC memory card's "Removable Disk" window.
NOTE: A WMA file with DRM will not playback if you directly drag and drop it into the “Removable Disk” window. See page 17 for downloading WMA files with DRM from the computer to your player.
5. To remove the SD/MMC memory card, turn the unit off, then push the edge of the card and the card will spring out. Carefully remove the card, as shown in Figure 3.
6. Replace the top cover until it snaps in place.
NOTE:
• If the external card is inserted, removed or replaced, the unit will search the music files to update the index when the unit is turned on again.
• If the external card is inserted, the memory card indicator will appear at the top side of the display while in the Music Player mode.
• While the player is on, if the SD/MMC card is removed or inserted, “Unload the Card?” or “Load the card?” will appear in the display. Press the Navigation control to select YES to reload or load the SD/MMC card to update the player. Otherwise, the SD/MMC card’s music files will not be played.
19
Figure 1
label side
Figure 2
Figure 3