Memorex MB002 manual Using INTRO. Scan, Locking a Message, Erasing Messages

To skip the current message and go to the previous message, press PLAY/STOP button(if you are playing back a message), press SEARCH button twice, then press PLAY button. The recorder beeps and the message number changes.

To skip the current message and go to the next message, press PLAY/STOP button (if you are playing back a message), press SEARCH button once, then press PLAY/STOP button. The recorder beeps and the message number changes.

Note: If you do not press PLAY/STOP button to stop playback, the recorder automatically plays back all of the messages after the one you select.

USING INTRO. SCAN

Follow these steps to set the recorder to play the first 5 seconds to each recorded message.

1.If you are playing back a message, press PLAY/STOP button

2.Press MODE button twice

3.Repeatedly press SEARCH button until ON appears. Press MODE to confirm.

4.Press PLAY button. The recorder plays the first 5 seconds of each message, starting from the current message to the last message.

5.The recorder automatically stops after it plays the last message.

LOCKING A MESSAGE

Note: You can lock and unlock any stores messages.

Follow these steps to lock a message so the recorder will not accidentally erase it.

1.If you are playing back a message, press PLAY/STOP button.

2.Select the message you want to lock (see “Skipping Messages” on Page 9-10).

3.Repeatedly press MODE button until appears.

4.Repeatedly press SEARCH button until ON appears. Press MODE button to confirm. The recorder locks the message you selected.

10

Untitled-1 6

5.Repeat Steps 1-4 for each message you want to lock.

6.To unlock a message, repeat Steps 1-3, then repeatedly press SEARCH button until OFF appears. Press MODE button to confirm. The recorder unlocks the message you selected.

ERASING MESSAGES

You can erase an individual message or all the messages in a folder.

Erasing a Single Message

1.Select the message you want to erase (see “Skipping Messages” on Page 9-10).

2.Hold down ERASE button for about 1 second. The flashes.

3.Press ERASE button again. The recorder beeps and erases the message, renumbering the remaining messages.

Erasing All Messages in a Folder

1.Select the folder that contains the messages you want to erase (see “Selecting a Folder” on Page 7-8).

2.Hold down ERASE button for about 3 seconds. The flashes and ALL appears.

3.Press ERASE button again. The recorder beeps and erases all messages in the folder you selected (except any message you locked).

Erase function activated

11

9/6/02, 11:45 AM