To Play a CD

MC2862 O/M.QXD 9/27/02 10:35 AM Page 8

OPERATION (CONTINUED)

1	2
	2
	1

Insert a CD as described on the previous page. Press the POWER ON/OFF button

❶to turn the unit on; the POWER indicator will light and the total number of tracks will appear in the display. Slide the Function switch ❷ to the CD position.

Press the PLAY/PAUSE ( ) button to start playback. TO PAUSE PLAYBACK, press the PLAY/PAUSE

( ) button again; the display will blink. Press again to resume playback.

To skip forward or backward through the tracks on the disc, press the SKIP or button. To search forward or backward through the tracks on the

disc, press and hold the SKIP or button.

4
2	3
	1

Adjust the VOLUME control ❶ as desired. Press the DISPLAY button ❷ when the time is showing to see the number of tracks on the CD. When the disc is through playing, it will stop. Press the STOP (■) button ❸ to stop the disc before it is ﬁnished.

FAQS: Do I need an adapter to play 3” singles?

No, simply insert the 3” single into the groove.

What is the maximum time for a CD in this unit?

The maximum time is 74 minutes.

NOTES:

•If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show, “no”.

•To remove the CD, see page 7, “To Remove a CD” section.