Panasonic EP3513 Before Using the Unit, Setting UP the Massage Lounger, Where to Use the Unit

BEFORE USING THE UNIT

SETTING UP THE MASSAGE LOUNGER

After Removing Everything from the Box, You Should Have the Following

Massage Lounger Accessories

Pillow

Attachment Screws (M6#16) — 6

Left Armrest — 3

Right Armrest — 3

Control Panel Stand Attachment Screws (M6#10) — 4

Armrests

Marks indicating left and right can be found on the underside of each armrest.

Front Back

Connector Hose

Air Plug

Control Panel Stand

Clip

Small holes on the inside fabric are an intentional part of the functional design.

Plug Cover Attachment Screws (M5#16) — 2

Plug Covers — 2

Allen Key — 1

Control Panel

Stand Covers

Lock Switch Keys — 2

(Cross-section)

0.2" (4 mm)

Where to Use the Unit

Ensure there is adequate space for reclining.

Keep at least 4" (10 cm) away from

wall, etc.

Mat

Approx. 77" (195 cm)

Approx. 14"	Width approx. 27" (68 cm)	Approx. 12"
(35 cm)	(approx. 33" (84 cm) with	(30 cm)
	armrests attached)

Keep at least 4" (10 cm) away from wall, etc.

CAUTION

• Do not use the unit in areas with high humidity,

such as the bathroom, etc. as this can lead to

electric shock or other accidents.

• Place the unit on a totally flat surface.

Failure to do so may result in the seat tipping over.

• Do not use the massage lounger in direct sunlight or in

places where it will be exposed to high temperatures,

such as in front of a heater, etc., as this can cause

discoloration or hardening of the synthetic leather.

• Place the unit on a mat to prevent floor damage.

Area where legrest	Area where unit touches floor.
could touch floor.

• When placing a mat under the unit, the size of the mat

should be sufficient (at least 47#28 in. (120#70 cm)) to

cover the areas where the unit touches and the legrest

could touch the floor, as shown in the diagram on the left.

Carrying in the Unit

Move the chair by having one person hold onto the rubber section on the underside of the legrest and another person use the handle on the back of the backrest.

Legrest Handle

Mat

Rubber	Place your fingers in the groove.
Section

CAUTION

•Make certain the legrest has been retracted fully to its original length.

Failure to observe this safeguard could result in injury due to the legrest returning to its original length when the unit is being moved.

•Use care to prevent pinching of hands or feet when letting go of the legrest as its mechanism will cause it to slam shut.

•Use care to prevent lower back and other injuries that could occur when lifting this heavy object (approx. 179 lbs (81 kg)).

8