JBL VRX900 manual VRX928LA 8, Two-way, Llne-array Speaker

	SPECIFICATIONS
VRX928LA - 8", Two-way, Llne-array Speaker
System Type:	8" two way, line array loudspeaker system
Frequency Range (-10 dB):	70Hz -20kHz
Frequency Response (±3 dB):	87Hz - 19kHz
Coverage Pattern:	100º x 15º nominal (horizontal x vertical), single unit
Crossover Modes:	Bi-amp / passive, externally switch-able
Crossover Frequency:	2.0 KHz
Power Rating1:	400 W / 800 W / 1600W
(Continuous / Program / Peak)	Bi-amp LF: 400 W / 800 W / 1600W
	Bi-amp HF: 30 W / 60 W / 120 W (two drivers)
System Maximum SPL2:	122dB SPL (passive mode)
	LF: 122 dB
	HF: 128 dB
System Sensitivity (1 W @ 1m)	90 dB SPL (passive mode)
	LF: 90 dB
	HF: 108 dB
LF Driver:	1 x JBL 2168H-1, 200 mm (8 in) Differential Drive® woofer
HF Driver:	2 x JBL 2414H, 25 mm (1.0 in) neodymium compression driver
Nominal Impedance:	Passive: 8 Ohms
	Bi-amp LF: 8 Ohms
	Bi-amp HF: 16 Ohms
Active Tunings:	Tunings available at www.jblpro.com
Enclosure:	15 mm - 25 mm, multi ply birch plywood
Suspension / Mounting:	Dual 36mm pole socket included. Suspension requires optional
	VRX-SMAF line array frame kit or 10 mm eyebolt.
Transport:	Integrated handle with backing cup
Finish:	Black DuraFlex™ finish
Grille:	Powder coated, black, 18 gauge perforated steel with acoustical transparent black foam backing.
Input Connectors:	2x Neutrik® Speakon NL-4
Dimensions (H x W x D):	230 mm x 419 mm x 267 mm (9 in x 16.5 in x 10.5 in)
Net Weight:	12.7 kg (28 lb.)
Optional Accessories:	VRX-SMAF: Suspension array frame
	SS2-BK: Tripod speaker stand
	Eyebolt Kit (Part # 229-00009-01)

1 IEC filtered noise with 6 dB crest factor, 2 hours. 2 Calculated, based on power rating and sensitivity.

Functional Block Diagram

6