JBL EON15 G2 manual Specifications, Frequency Response

Page 6

Balanced loop-through / mix output. “Daisy-chain” additional EON speakers or send the mixed output to a mixing console.

90º x 60º (nominal) constant directivity horn.

Thermomaster® Total Thermal Management System®. A single piece, cast-aluminum baffle integrates the woofer frame, horn, and amplifier heat-sink. Air movement in the finned ports dissipates heat - no internal or external cooling fans are required.

Rugged, light-weight, black co-polymer enclosure with cast aluminum baffle.

Integral 35mm pole mount receptacle with securing thumb screw.

Multi-angle enclosure for front of house or stage monitor application.

Tailored dynamic processing protects amplifiers and speakers from being over-driven without producing extreme changes in frequency response as level varies.

Extended low-frequency performance. Delivers powerful bass down to 39 Hz.

Specifications

Freq. Range (-10 dB):

39 Hz - 18 kHz

Freq. Response (+3 dB):

42 Hz - 17 kHz

Horz. Coverage (-6 dB):

90Þ nominal

Vert. Coverage (-6 dB):

60Þ nominal

Rated Maximum SPL:

129 dB, @ 1 m (3.3 ft)

 

 

Dimensions (H x W x D):

686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in.)

Net Weight:

21 kg (46 lbs.)

 

 

LF Driver:

Integral frame with one 15” (380 mm) driver, dual neodymium

 

magnet, 2” Differential-Drive® voice-coil.

 

HF Driver:

JBL2418H-1 1” (throat diameter) compression driver with 1.75”

 

diameter titanium diaphragm. Ferro-fluid cooled.

 

Amplifier Power LF:

300 watts @ low-frequency driver impedance.

 

Amplifier Power HF:

100 watts @ high-frequency driver impedance.

 

Input 1 Sensitivity:

-44 dBu to -22 dBu for rated output

 

 

(Mic/Line switch in MIC position)

 

 

-12 dBu to +20 dBu for rated output

 

 

(Mic/Line switch in LINE position)

 

Input 2 & 3 Sensitivity:

-18 dBu to +20 dBu for rated output

 

Output Level:

+20 dBu (peak), Loop/Mix switch in MIX position

 

Audio Connectors

 

 

 

Input 1

XLR/F, balanced

 

 

Input 2 & 3

1/4” Phone, balanced (TRS)

 

Crossover Freq.

1.5 kHz

 

 

Limiting

Low frequency amplifier controlled by dynamic filiter

Loop/Mix Out

XLR/M, balanced.

 

 

EQ:

High Frequency Shelving, +15

 

 

Low Frequency Shelving, +15 dB

 

 

@ 120 Hz.

 

 

AC Input

110 - 230 VAC, 50 - 60 Hz., 175 watts rating per UL, dectachable IEC power cable

Frequency Response

 

 

110

 

 

 

 

 

(dB)

100

 

 

 

 

 

 

 

 

 

 

 

1W/1M

90

 

 

 

 

 

 

 

 

 

 

 

SPL,

80

 

 

 

 

6

 

 

 

 

 

 

70

 

 

 

 

 

20

100

1000

10000

20000

Frequency (Hz)

Image 6
Contents EON15 G2 User Guide Page Contents Welcome About the EON15 G2 Electrical SafetyFeatures Stand MountingSpecifications Frequency ResponseAvailable Accessories QuickstartConnectors SwitchesControls and Connections Controls MIX/LOOPVoltage Selection and Fuses IndicatorsFuse Replacement Changing VoltageApplication Examples Basic Sound Reinforcement System with Stage MonitorsVocal / Acoustic-Electric Guitar Health Club InstructionDJ or Sound Reinforcement System with EON PowerSubs DJ System with Passive Subwoofers Keyboard Amplification and MixingTroubleshooting Page Reference Connections Balanced and UnbalancedCables and Connectors Block Diagram Loudspeaker Placement and MountingJBL Warranty and Contacts Who Is Protected by This Warranty?