JBL 406-000-05970-E manual Specifications, Control Monitor, Loudspeakers

SPECIFICATIONS

	CONTROL® MONITOR
	LOUDSPEAKERS
Frequency Response (–3dB)	50Hz – 40kHz
Recommended Amplifier Power Range*	10W – 125W
Power Handling (Peak)	240W
Sensitivity (2.83V/1m)	87dB
Nominal Impedance	8 Ohms
Crossover Frequency	2400Hz – 18dB/octave, low-pass;
	2400Hz – 24dB/octave, high-pass
Low-Frequency Transducer	5" (130mm) PolyPlas,™ shielded
High-Frequency Transducer	1" (25mm) Soft-dome,
	shielded; EOS waveguide
Dimensions With Grille	10" x 6-5/8" x 8"
(H x W x D)	(259mm x 164mm x 202mm)
Weight per Speaker	6.6 lb (3kg)

*The recommended amplifier power range rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels.

JBL and Control are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Elliptical Oblate Spheroidal and PolyPlas are trademarks of Harman International Industries, Incorporated.

Features, specifications and appearance are subject to change without notice.

Harman Consumer Group, Inc.

250 Crossways Park Drive, Woodbury, NY 11797 USA

www.jbl.com

© 2008 Harman International Industries, Incorporated. All rights reserved. Part No. 406-000-05970-E

Declaration of Conformity

We, Harman Consumer Group, Inc.

2, route de Tours

72500 Château du Loir

France

declare in own responsibility that the product

described in this owner’s manual is in compliance

with technical standards:

EN 61000-6-3:2001

EN 61000-6-1:2001

Laurent Rault

Harman Consumer Group, Inc.

Château du Loir, France 7/08