IRiver T20 Installing iriver plus, Charging the battery, Which appear as each window

Getting started

Connection/Installation

Charging the battery	If the	icon is displayed, the battery is out of power and you should charge
	the battery .

1.Connect the player to PC after push the USB lever and pull out the USB connection port as below picture.

Getting started

Connection/Installation

When you connect T20 to your PC, iriver plus 2 will be started and all titles and Playlists in the library will be transferred to T20 In addition, you can create and manage your own Playlist.

Installing iriver plus 2

Note : System Requirements

The minimum PC requirements for running iriver plus are as follows.

300 MHz Pentium processor or higher	128MB RAM
Windows 2000/ XP	SVGA or high resolution monitor
Microsoft Internet Explorer version 6.0 or later	(800x600 resolution or higher)

2. “USB Connected” on the display is appeared, charging indicator is displayed.

3. Disconnect the player to PC when charge is completed and then pull in USB

1.The program installation process will start automatically after inserting the Installation CD to the PC's CD-ROM drive. If the program installation process does not start automatically, click the "My Computer"icon and run “iriver2_setup_full.exe ” file in the CD-- ROM drive.

2.If the "Installer Language"window appears, select the desired language and click the [OK ] button.

connection port as picture.

Note

You can charging the battery at tuned off the player.

Charging time : Approx. 3.5 hours (At fully discharged/Stop mode)

3. Follow the on screen instructions,	4. If the "License Agreement" window
which appear as each window.	appears,click the [I Agree ] button.

15 16