GENERAL
BEEP VOLUME
Set beep volume level to 0 / 1 / 2 / 3 step.
RESUME
When ON, player resumes to previous place in song after STOP or Power OFF.
FADE IN
When activated, volume increases gradually at playback mode to prevent sudden loudness.
LANGUAGE (Supports 38 languages)
Song title and ID3 tag information is dependent on 
the version of the PC operating system that was 
used to create it. (For example, if a MP3 files is 
created in a Korean version of Windows, the 
language setting should be Korean for proper title display)
TUNER REGION
You can set the FM frequency and step according to your area.
Set them to fit your region to receive FM Radio.
If tuner region is newly set, the old preset stations is deleted.
LOAD DEFAULT VALUE
Initialize all settings to original factory setting.
FIRMWARE UPGRADE
You can upgrade the player’s Firmware.
Refer to page 49 for details.
DB SCAN
Turn the Navigation to search by using ID3 Tag on or off.
Yes : The player will take several seconds when it turns on to scan the DB file. This allows the Artist,
Album, Genre, and Title searching.
Note : For Artist, Album, Genre, and Title searching to be activated, a DB file must be created on the H140. Refer to page 24 for instructions.
No : The H140 will power on more quickly but only File/Folder navigation will be available.
DISPLAY
BACK LIGHT (Battery)
You can adjust the time that the Backlight stays on while the player is operated using the battery built in the player.
(Time range can be made from 1~60 sec.)
BACK LIGHT (Adapter)
You can adjust the time that the Backlight stays on while the player is operated using AC adapter.
(Time range can be made from 1~59 sec.) If 60 sec is selected, backlight is always on.
40 | 41 |