DATE, Time & Clock Mode Setting

DATE SETTING

With a new radio or you remove the battery from the unit for over 20 seconds, you lose the date setting and will then need to reset it, as follows.

1.Turn off the unit first.

2.Press <M+/FOL+/DATE> button quickly. The year will flash. Then press the <AUTO-> or <AUTO+> button quickly (or rotate the <Tuning Knob>) to adjust the year.

3.After adjusting the year, press <M+/FOL+/DATE> button shortly. The month will flash and then press <AUTO-> or <AUTO+> button quickly (or rotate the <Tuning Knob>) to adjust the month.

4.After adjusting the month, press <M+/FOL+/DATE> button quickly, and the date flashes. Then press <AUTO-> or <AUTO+> button quickly (or rotate the <Tuning Knob>) to adjust the date.

5.When all set, press <M+/FOL+/DATE> button quickly again to exit setting mode. The date is set.

TIME SETTING

With a new radio or remove the battery from the unit, you lose time setting and will then need to reset it, as follows.

1.Turn off the unit first.

2.Press <M/ATS/TIME> button quickly. The hour will flash. Then press <AUTO-> or <AUTO+> button quickly (or rotate the <Tuning Knob>) to adjust the hours.

3.After adjusting the hour, press <M/ATS/TIME> button quickly, the minutes flash and then press <AUTO-> or <AUTO+> button quickly (or rotate the <Tuning Knob>) to adjust the minutes.

4.When all set, press <M/ATS/TIME> button quickly again to exit time set mode, the time is set,

NOTE: You don't need adjust the seconds. The seconds will start from 00 once again after adjusting the hours and minutes.