Playback Preparations
Using the Power Adapter
The DVD player is powered via the switching power adapter or the battery pack (both are included). Directions for connections are found below:
1.Connect the AC adapter to the DVD player in the slot marked “Power In”.
2.Connect the rabbit joint end of the AC adapter to the power cord.
3.Plug the
4.When you want power down, turn off the player’s power off first, then unplug the power supply to prevent malfunctions.
Operation
1.Make your power connections.
2.Lift up the screen on the DVD player.
3.Switch “POWER” to the “ON” position.
4.Adjust the volume with the “VOLUME” adjust knob (also adjusts earphone volume).
5.Press the “Open” button to open the disc tray cover.
6.Put disc into the tray house with the printed side up.
7.Gently push down and close the disc cover.
- 13 -