System Setup
ANGLE MARK
•This item is used to set the angle mark on or off.
• | Press the | buttons to highlight this item. |
• | Press the | button to access. |
• | Press the | buttons to select ON or OFF. |
•Press the ENT/ENTER button to confirm your selection.
• Press the | button to exit. |
Note: This function is effective only if alternative viewing angles are available on the disc.
RESUME
•This item is used to set the last memory state.
• | Press the | buttons to highlight this item. |
• | Press the | button to access. |
•It includes 4:3 PS, 4:3 LB, and 16:9.
•Press the ENT/ENTER button to confirm your selection.
• Press the | button to exit. |
DEFAULTS
•This item is used to reset the unit.
• | Press the | buttons to highlight this item. |
• | Press the | button to access. |
•Press the ENT/ENTER button to reset. All settings to your unti are now set back to its original state.
• Press the | button to exit. |
26