System Setup*
You can change the default settings of this player to customize its performance to your own preferences.
Note: Program the system while playback is stopped completely or there is no disc in the payer.
To Set up your system:
1.Press the SETUP button and the setup menu will appear on the screen.
2.Press the direction buttons to select a
3.Press the SETUP button again to exit the setup menu at any time during setting.
General Setup
SCREEN SAVER
•This item is used to turn on and off the screen saver.
•Press the ST buttons to highlight this item.
•Press the X button to access.
•The default setting of this player is on.
•Press the ST buttons to choose on or off.
•Press the ENT/ENTER button to confirm your selection.
•Press the W button to exit.
TV TYPE
This item is used to set the TV display mode.
•Press the ST buttons to highlight this item.
•Press the X button to access.
•It includes 4:3 PS, 4:3 LB, and 16:9.
•Press the ST buttons to choose the desired language.
•Press the ENT/ENTER button to confirm your selection.
•Press the W button to exit.
Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is connected. Select 16:9 when a 16:9 wide screen TV is connected.
DEFAULT
•This item is used to reset the player.
•Press the ST buttons to highlight this item.
•Press the X button to access.
•Press the ENT/ENTER button to reset. All settings to your unit are now set back to its original state.
•Press the W button to exit.
*Your portable DVD player functions may differ from the player shown.
24