Remote Control
Preparation of Remote Control
Follow the steps below to install the battery.
1.Pull the battery holder out from the remote control in the direction of the arrow.
2.Load a new battery properly with the (+) sided up.
3.Insert the battery holder back into the remote control.
Battery type: CR2025 3V
Battery service life: approximately 1 year under normal use (at room temperature).
Use of Remote Control
Point the remote control unit to the remote sensor within the range of 5 meters and angles of 60 degree, and without obstacles between remote control and remote sensor.
Note
¾Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or a fire. Battery leakage may damage the remote control.
¾Do not expose the remote control unit to direct sunlight.
¾Do not recharge, disassemble, deform or heat the battery.
¾Do not put the battery in fire or water.
¾Immediately replace the exhausted battery.
¾Take out battery when the remote is not in use for a long time.
14