Yamaha DVD-S1700 manual Hdmi setup menu, 33 En, Adjusting picture settings, Setting the Hdmi video

Switching the SCART video out (U.K. and Europe models only)

Select this setting to toggle the video signal output from the AV terminal between CVBS (composite video) and RGB.

•Select [Scart Video Out] in [VIDEO] menu.

CVBS

Select this to output composite video signals.

RGB

Select this to output RGB video signals.

Adjusting picture settings

This unit comes with 10 sets of picture color settings that you can define yourself.

•Select [Picture Setting] in [VIDEO] menu.

Brightness

Set this to adjust the overall brightness of the image.

SETUP MENU

Chroma delay

Set this to adjust the advance delay of the chroma signal for a perfectly clear picture.

Control range: –2 to +2

True Life

Set this to produce more dynamic picture by increasing the picture contrast and the color intensity.

Control range: 0 to +6

Notes

•All picture settings are not available for SCART (RGB) output.

•The [Hue] setting is not available for interlace output at the VIDEO OUT (COMPONENT) jacks.

•[Sharpness Mid], [Sharpness High], [Gamma] and [Chroma delay] settings are not available for HDMI output.

•The [True Life] setting is only available for progressive scan and HDMI output.

HDMI setup menu

English

Control range: 0 to +6

Contrast

Set this to adjust the bright areas (white level) in the image.

Control range: –6 to +6

Hue

Set this to adjust the hue or phase of the image.

Control range: –6 to +6

Sharpness Mid

Set this to adjust the sharpness of the image for the intermediate frequencies.

Control range: –6 to +6

SETUP

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

Move :

1/1

HDMI Video

Wide Screen Format

DVI Output Range

HDMI Audio

Return Select : Enter

Sharpness High

Set this to adjust the sharpness of the image for the high frequencies.

Control range: –6 to +6

DNR

Set this to reduce video noise.

Control range: 0 to +6

Gamma

Set this to adjust the intensity of the picture non-linearly.

Control range: –6 to +6

Chroma level

Set this to adjust the density of the color.

Control range: –6 to +6

Setting the HDMI video

You can adjust the resolution depending on the monitor you are using. This function is only available when this unit is connected to an HDMI-compatible component via the HDMI jack.

33 En