ViewSonic VS12840 manual Instruction to install the built-in SATA2.5’ HDD

Page 10

Instruction to install the built-in SATA(2.5’) HDD

1.Remove four hex screws from the rear (connector panel) us- ing the supplied tool.

2. Slide out the rear cover, complete with circuit board. It may be necessary to push gently from the front by removing the front cover via four hex screws.

3. Place the SATA(2.5’) HDD closely at the back of circuit board, then insert it into the SATA matching slot.

4. Tighten the screws on the SATA(2.5) HDD with the supplied tool.

5. Slide the circuit board along with the board slot into the main case, then tighten the screws on the main case.

Note:

1) Please format the SATA(2.5’) HDD before fitting it into the player.

2) Make sure not to damage embedded components on the circuit board.

3)After successful installation, enter setup menu, and choose “SATA” in device selection, for detailed instruction please refer to Page 11.

ViewSonic

VMP52

Image 10
Contents VMP52 Compliance Information Following information is only for EU-member statesImportant Safety Instructions Declaration of RoHS Compliance For Your Records Copyright InformationProduct disposal at end of product life Table of Contents Simple Operation Front pannel Rear pannelSchematic Diagram of Remote Control VMP52 Instruction to install the built-in SATA2.5’ HDD Three input Hdmi switcher End-user License Agreement PrecautionsPlease ensure Safety Instructions Maintenance TipsFunctional Description Connection of Signal and Memory Devices Packing ListPlayer Setup Restore Factory Default Factory Default Playing Operations Photo playingMusic playing Movie playing Book playing Specifications Appendix Customer Support ViewSonic PolandViewSonic Germany How long the warranty is effective Limited WarrantyViewSonic Digital Media Player What the warranty covers Who the warranty protectsLimitation of implied warranties How to get serviceExclusion of damages