X-Micro Tech F510 user manual Repeat function, Lyric display function

4.Use X-VDO MP4 F510 controls to adjust playback and volume level to listen to your WMA/MP3 music.

A-B Repeat function

If you want to listen to one section of the music repeatedly, you may use this A-B repeat function.

In the mode of playing music, hold on to the A-B button to set the starting point (A point) of the music．Long press A-B button again to set the ending point (B point) of the music. And then A-B section will be played repeatedly on the player. Hold on to the A-B button again to cancel this A-B repeat function.

Note:

9The interval between point A and point B must be more than 3 seconds.

Lyric display function

X-VDO MP4 F510 supports lyric files in LRC format.

1.Prepare a MP3 or WMA music file, e.g. happymusic.mp3;

2.Prepare a corresponding lyric file which extension name should be .lrc. e.g. happymusic-2004.lrc.

3.Rename the lyric file, e.g. happymusic.lrc, to correspond with the music’s title.

4.Copy the lyric file and music file to X-VDO MP4 F510.

5.Disconnect X-VDO MP4 F510 (follow the instructions provided on the guide of “removing X-VDO MP4 F510 from your computer”).

6.Use the Skip button to select the music file, e.g. happymusic.mp3. Press the Play button to play.

7.The lyric displays synchronously on screen while the music is playing.

Note:

9X-VDO MP4 F510 supports LRC format only.

9If the lyric does not synchronize with the music, please download a better lyric file from the internet and try again.

9Make sure the music file and LRC file are located in the same directory and their filenames are the same. If not, X-VDO MP4 F510 can not recognize the lyric file.

7