Harbor Freight Tools 96456 manual Operation, Starting the Engine

Page 8

5.Recheck oil level and add more oil if needed. DO NOT OVERFILL. Overfilling the oil reservoir can cause excess pressure causing damage to the engine.

6.Fill the gasoline tank with regular grade unleaded gasoline. Do not add oil or use leaded gasoline. Fuel cap must be tightly in place prior to starting the engine.

Starting the Engine

For complete engine operating instructions, see the engine manufacturer’s owners manual shipped with this product.

1.Position the Road Sweeper on a level surface. Before starting the engine, check the oil level. Unscrew the oil dipstick, pull it out, wipe it off, then re-insert into the engine. Screw it into place, then unscrew it, remove it and read the oil level. If the level is low, add standard 30 weight or multi-grade motor oil until the reading is in the range indicated on the dipstick. DO NOT OVERFILL, as this will cause excessive pressure in the oil reservoir and can cause engine damage.

2.Before starting, check to see that there is gasoline in the fuel tank. If the fuel level is low, fill before starting with fresh, clean standard unleaded gasoline. Do not add oil to the gasoline. FIRE HAZARD: Do not add gasoline to the engine after it has been running and is hot. Allow the engine to cool before adding gasoline.

3.Open the fuel valve by rotating the Fuel Valve Lever to the right.

4.Close the manual choke all the way by rotating the Choke Lever to the left.

5.Press the Primer Bulb 8 times to prime the carburetor.

6.Pull the starting cord 3 or 4 times to introduce gasoline vapor into the cylinder.

7.Move the manual choke to its 1/2 closed position.

8.Pull the starting cord again. The engine should start with the first or second pull.

9.Once the engine is started, let it warm up. As it warms, gradually open the choke until it is fully open. You may then begin to use the road sweeper.

10.If the engine does not start or run properly following these procedures, check the troubleshooting section in this owners manual.

Operation

1.This road sweeper is designed for sweeping dust, dirt, leaves and snow from driveways, walkways and paved areas. This Owner’s Manual assumes that the operator has an understanding of the use of road sweepers and gasoline engines.

2.Only use on firm, level surfaces. Use on steeply inclined surfaces may cause the operator to lose control of the sweeper. Use on loose or gravel surfaces may

SKU 96456

For technical questions, please call 1-800-444-3353.

Page

Page 7 Page 9
Image 8
Page 7 Page 9
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSave This Manual For technical questions, please callGeneral Safety Rules Specific Safety RulesWork area safety Personal safetyFor technical questions, please call For technical questions, please call Specifications Set Up InstructionsUnpacking Operating InstructionsAssembly Mandatory Maintenance Before First UseAdjusting the Handle Initial Engine ServiceOperation Starting the EngineMaintenance TroubleShooting Engine Symptom Possible Cause Possible RemedySKU For technical questions, please call Parts List and Assembly DiagramPart Description ’ty Part Description ’ty Assembly Diagram Limited 90 DAY Warranty Record Product’s Serial Number Here

96456 specifications

Harbor Freight Tools 96456 is a versatile, efficient, and powerful tool that caters to both hobbyists and professionals alike. This particular model has garnered attention for its robust design and multitude of features that make it a must-have in any workshop or garage.

One of the standout characteristics of the 96456 is its impressive power output, allowing users to tackle a variety of projects with ease. The tool is equipped with a durable motor that provides consistent performance, making it ideal for cutting, grinding, and shaping various materials. The design focuses on user convenience, ensuring that even beginners can operate it with minimal effort.

This model incorporates advanced technologies that enhance its overall functionality. The ergonomic design of the handle ensures a comfortable grip, reducing fatigue during prolonged use. Additionally, the 96456 features variable speed settings, which allow users to adjust the speed according to the specific task at hand. Whether you need precision for intricate work or power for heavier applications, this tool adapts to your needs.

Safety is a priority in the design of the Harbor Freight Tools 96456. It includes several safety features, such as a protective cover that shields users from debris and sparks while working. The tool's built-in overload protection prevents overheating, extending the lifespan of the motor and ensuring reliable performance.

Another notable aspect is its versatility. The 96456 can accommodate various attachments and accessories, making it suitable for a wide range of applications, from woodworking to metalworking. This adaptability means that users can optimize the tool for specific tasks, increasing productivity and efficiency.

Portability is another key characteristic of the Harbor Freight Tools 96456. Its lightweight design allows for easy transportation, whether moving it between job sites or simply storing it when not in use.

In summary, the Harbor Freight Tools 96456 stands out for its powerful performance, user-friendly design, advanced safety features, and versatility. This tool is designed to meet the demands of diverse projects, making it a valuable addition to any toolkit. Whether you are a DIY enthusiast or a professional tradesperson, the 96456 is engineered to provide the reliability and efficiency needed for a wide range of applications.
Top Page Image Contents