Figure 3
4.To release the material that has been picked up by the Magnetic Sweeper, place Housing
(1) over a trash can or desired debris des- tination. Pull up on the Housing Handle as shown in Figure 3, above.
Please note: Move the Sweeper away from the debris before releasing the Housing Handle or it will pick up the debris again.
cleaning and maintenance
1.BEFORE EACH USE, inspect the general condition of the Floor Sweeper. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts and any other condition that may affect its safe operation.
2.After Use, clean external surfaces of the Sweeper with clean cloth.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustra- tion purposes only, and are not available individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this document as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she
is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
Parts List & assembly
diagram
|
|
|
|
| Part | Description | Qty. |
|
|
|
|
| 1 | Housing | 1 |
| 2 | Wheel | 2 |
| 3 | Handle | 1 |
| 4 | Bolt/Washer | 2 sets |
| 5 | Handle Base | 1 |
| 6 | Housing Handle | 1 |
| 7 | Pan Head Bolt | 1 |
5
67
SKU 98399 | For technical questions, please call | Page 3 |