Other Functions
Snooze Alarm Operation
This operation allows extra sleep time af- ter the alarm is on. The alarm will be off by pressing SNOOZE until the snooze pe- riod is over. Snooze function can be used repeatedly up to 2 hours. After this, the alarm will turn off until the next alarm con- ditions are met. Set the “quiet time” as follow:
Brightness control | EN |
You can adjust the backlight by the |
|
BRIGHTNESS button, there are three |
|
modes you may select from: |
|
OFF - Backlight off.
HIGH - Backlight always high.
LOW - Backlight low.
1.Press and hold SNOOZE.
2.Press REV or FWD to set the “quiet” period (the default time is 9 minutes) from
1minute to 30 minutes. Release button, then the “quiet” period is set.
Seconds Time Display
The unit may display in seconds.
1.The radio should be off, and the clock should be in normal mode.
2.Press 
or 
to show sec- onds display.
3.Release to return to the hour and minute display.
E
M
U
L
O
V
s Y s A e L tn P h ISrig D B
7