Display CD player, Radio | Technicolor

Display

CD player

Program mode

PROG.

Mix play

REPEAT 1	ALL
REPEAT 1	ALL

Track number (shows during disc playback)

Repeat mode (REPEAT 1 - repeat current track, REPEAT ALL - repeat entire disc)

Playing disc	SELECT
	(OFF)
This unit is compatible with audio CD-R	TAPE
This unit is compatible with audio CD-R	CD
	RADIO
discs.

1.	Selects CD from the SELECT switch.
2.	Press OPEN	to open disc compartment
	door.
3.	Insert a disc with label face up.

Random Playback

During playback, press to play tracks randomly.

In stop mode, press to activate random

function and press PLAY/PAUSE to begin random playback.

The icon appears on display when random playback is activated.

Radio

Tuning to a station

1.Select RADIO from the SELECT switch.

SELECT (OFF)

TAPE RADIO CD

4.Adjust MIN. VOLUME MAX. to your desired listening level.

4.	Push CLOSE to close disc compartment door.
	Total number of track on disc can be read
	from display.
5.	Press PLAY/PAUSE to begin CD playback.

6. Press or to skip to previous or next track respectively.

7. Press and hold

search quickly current track backward or

Press again for de-selection.

Programming

1. Press PROG. to enter program mode. The

program location will flash once on the

display. Then the track number stored in the

memory location will keep flashing.

2.Slide BAND to select between MW/FM band.

3.Rotate < TUNING > to select radio station.

Tip:

Extend or reposition the antenna for better FM reception. Move the unit

for better MW receptions

forward respectively.

8.Adjust MIN. VOLUME MAX. to your desired listening level.

9.Press PLAY/PAUSE or STOP to pause or stop disc playback respectively. To resume playback, press PLAY/PAUSE again.

Repeating

Press REPEAT once to repeat current track and REPEAT 1 icon shows on display.

Press REPEAT twice to repeat entire disc and REPEAT ALL icon shows on display.

Press REPEAT a third time to turn off repeat mode.

Note:

When random playback is activated, only Repeat All can be selected.

	If the memory location is empty, 00 will be
	flashing.
2.	Press	or	to select the track

	you want to program.
3.	Press PROG. again to confirm your selection
	and access the next program location.
4.	Repeat steps 2 to 3 to program to a
	maximum of 20 tracks.
5.	Press PLAY/PAUSE		in program mode to


	start program playback (PROG. indicator
	remains lit on the display).
	Press STOP	to return to normal playback


	mode.

Tip:

If you are in normal playback mode but want to play the saved program.

Press PROG. and then PLAY.

Clearing program list

Your program will be erased once you open the disc compartment door or change to another source mode (e.g. radio, tape).

TM9237 EN

4-5

6/24/05, 5:36 PM