THE DIGITAL CD CLOCK RADIO
You can choose to wake to Radio 
, CD
or tone 
.
THE DIGITAL CD CLOCK RADIO
Setting Wake to Radio | EN |
Setting Wake to Tone
1
Smart Design
Once you set the wake time, e.g.
AL1, wake to tone 
indicator lights on the display.
or
1Set wake time. (Refer to “Setting Wake Time)
2Press AL.1 
repeatedly until
indicator flashes on the display.
Setting Wake Station
3a. Press RADIO ON/BAND 
to select FM/MW and press
TUNING/TIME DN or UP 
to tune to your desired station.
1Press AL.1 
to change to 
wake 1 tone mode.
Press AL.2 
to change to 
wake 2 tone mode.
Tip:
1.With the GRADUWAKE feature, the alarm tone volume will increase gradually to its maximum in about 30 to 45 seconds.
2.You cannot adjust the volume level of the alarm tone.
Smart Wake Up System
• If the alarm sounds when you are listening to music with headphones, both the headphone and the unit will sound the alarm simultanenously.
To change to another wake mode (e.g. from CD to radio), simply press AL.1 or AL.2 to scroll through wake options.
b. Press MEMO SET 
to enter preset mode and
c. Press MEMO RECALL |
| repeatedly to select Alarm Memo “PAL” | ||
(11th preset station). |
|
| ||
d. Press MEMO SET |
|
| to confirm your selection. | |
4Turn 
to adjust to the desired
5Press OFF 
to turn off the unit.
•If no WAKE STATION is set, the wake station will stay at your last 
listening station.
• When setting AL2, follow the same procedure described above.
4 | 5 |
RR550CD EN rev.1 |
9/10/02, 6:00 PM