Power Supply
Your set can be powered from the mains (via its stand) or by batteries (independent operation).
4.Insert/ replace lithium battery. Polari- ties must match with indications.
5.Replace the holder.
Protection against power cutoffs for Automatic Time Set (ATS) function
As a backup for Automatic Time Set (ATS), a button lithium battery is already in- cluded. However, this button cell battery can also be exhausted and we recommend that you replace it every
1.Remove the
2.Remove the cover of the battery com-
partment at the rear of the set by pushing the cover in the direction of the arrow.
3.Pull out lithium battery holder located at the side of the battery compartment.
Batteries
Insert 3 x 1.5 volts (R6/AA) batteries as in- dicated in the rear of the unit. Put the cover back in place.
2
1
2
RR75 Euro IB | 2 | 6/22/00, 2:12 PM |