Playing Files
Playing Your Thomson Lyra AV Jukebox in Your Car Stereo
The cassette adapter lets you listen to the Thomson Lyra AV Jukebox in an automobile or RV safely without having to wear headphones.
The car kit is included with your Thomson Lyra AV Jukebox. This accessory kit includes a car cord adapter and a cassette adapter. The car cord adapter lets you power your Thomson Lyra from the cigarette lighter socket of a car, truck, or RV. It converts
1.If the headphones are attached, remove them. Insert the plug on the cassette adapter into the headphone jack on the player.
2.Set your cassette player to your normal listening level.
3.Insert the cassette (Side A up) into your cassette player making sure the cord is placed in the correct position for your type of player.
4.Attach the end of the car cord adapter to the DC IN jack on your Thomson Lyra AV Jukebox.
5.Remove the cigarette lighter from the socket, and insert the car cord into the socket.
6.Turn on your Thomson Lyra AV Jukebox, and operate the Thomson Lyra AV Jukebox to play music as described earlier in the chapter.
7.Control the volume with the cassette player.
8.When youÕre finished,
A.Remove the cassette adapter from the cassette player.
B.Turn off the Thomson Lyra AV Jukebox.
C.Remove the car cordÕs plug from the cigarette lighter socket.
Cautions: Make sure to place the wire securely into the slot on the cassette in the correct direction for the type of player you have.
The car cord adapter is designed to be used only with vehicles having negative ground electrical systems.
Use of any other car cord adapter may damage your Thomson Lyra AV Jukebox and void your warranty.
Playing Your Thomson Lyra AV Jukebox on Your Stereo System
Your Thomson Lyra AV Jukebox came with a Line Out Cable that you can use to connect your Thomson Lyra to your audio system.
1.Make sure your Thomson Lyra AV Jukebox is off.
2.Connect the 2.5mm
3.Connect the red (audio right) and white (audio left) cables to the corresponding right and left audio jacks on your stereo system.
4.Turn on the power to your audio system, and select the proper input setting on the audio system that corresponds with the way youÕve connected the Thomson Lyra AV Jukebox to the audio system.
5.Turn on your Thomson Lyra AV Jukebox Ð press and hold 
for 2 seconds.
6.Operate the Thomson Lyra AV Jukebox to play music as described earlier in the chapter.
Chapter 3 | 25 |