Troubleshooting

PDP2069 EN 4/17/03 4:57 PM Page 22

EN 3. Select Options from Options menu in		6. Click on the mp3 folder.
	the Burn window.	Make sure Add MultiAudio Tracklist
		(MAU) box is checked.
	4. Select Settings to display Burn set-
	tings.

5. Click on the General folder.

Make sure “mp3 disc” is selected under Disc type at Startup.

7. Click OK when finished.

Troubleshooting Tips

No power, does not work?

•Batteries may be inserted incorrectly.

•Batteries may be empty. Recharge (only Ni-Cd/Ni-MH battery) or replace new batteries.

•Connection may be loose if using AC/DC transformer.

Disc cannot be played?

•Disc may not be inserted correctly with label side facing upward.

•CD-RW (or CD-R) disc may not be recorded properly.

Skipping tracks or bad sound quality?

•Disc may be dirty or scratched badly.

•Disc lens may be dirty and need clean- ing.

•There may be strong magnetic fields (e.g. too close to TV) near the unit.

Cannot play mp3 disc?

•Clean the disc.

•Make sure files are saved under .mp3 extension. e.g. Rocky08.mp3

•Check that the recorded bit rate is with- in 32kbps and 320kbps.

•Only audio CD track will be played in mixed mode disc.

Cannot play WMA songs?

•Check that the WMA bit rate is within 64 kbps and 192 kbps and sampling rate is within 44 kHz and 48kHz.

•DRM not supported.

The display shows strange characters?

•Check that file names are created using the ASCII-ISO 8859-1 (Latin - 1) Table.