2.Press the right (Next) 
or left (Previous) 
of Joypad to select the desired stored favorite channel (CH01 to CH20).
In the channel mode, you can only select from the stored channels (CH01 to CH20). If you want to scan other channels manually, please return to the setting a channel mode
3. Press the
Record an FM Channel
1.Select a desired channel.
2.Press the REC button for 2 seconds.
3.Once the REC button is pressed, the selected channel will start being recorded. On the display, a recording FM file is generated and placed under the folder name of [/FM/]. The recording file name sequence starts from [F0001.WAV], then [F0002.WAV], and so forth.
On the display, the total recording time is shown below the current recording time.
4.Press the PLAY button to pause the recording and press the PLAY button again to continue.
5.Press the REC button for 2 seconds to stop the recording and the display will return to the previous FM status that displayed before the recording.
| Record | Channels | Sample | 512MB | 1 GB | |
FM | level |
| rate |
|
| |
Low | 2（stereo） 8 KHz | 16 hr | 32 hr | |||
Record | ||||||
Normal | 2（stereo） 16 KHz | 8 hr | 16 hr | |||
| ||||||
| High | 2（stereo） 32 KHz | 4 hr | 8 hr | ||
|
| 15 |
|
| ||