Remove the T.sonic in Mac OS
Drag and drop the Disk icon corresponding to your T.sonic into the trashcan. Then unplug your T.sonic from the USB port.
Remove the T.sonic in Linux
Execute umount /mnt/ T.sonic to
Recover Your T.sonic
If your T.sonic ever stops responding or locks up, you can use the Recovery program to restore it to its default settings. You can also use this function to update the unit’s Firmware.
Running the Recovery program will erase all of the data currently on the T.sonic.
If there are bad blocks in the flash memory chip of the T.sonic, the memory size of your T.sonic will be smaller than the original memory size after running the Recovery program.
T.sonic 610 and 612 have some differences in Recover display.
Recover the T.sonic in Windows 98SE
1.Plug your T.sonic into an available USB port. Select the 
button on the task bar and
select Programs > Transcend T.sonic 610 > T.sonic 610 Firmware Update to run the T.sonic 610 Firmware Update program.
If you have not installed the Windows 98SE driver yet, please install it first.
2.The T.sonic 610 Firmware Update dialog box appears.
24