Recording Functions
Select Voice Source for Recording
There are 3 kinds of the voice source for recording: FM, Line-In, and the built-in Microphone. About the FM recording, the previous section has already mentioned.
As for how to select the voice source (Line-Inor the built-in Microphone) for recording, please see the sub-section “Select Recording Device Mode” of the section “Settings” for details.
Record a Voice
1.Once you have pre-selected the recording device, you can begin voice recording.
2.Notice that you should not play any files before recording.
3.Press the A-B/REC button, and then the voice from the selected device will start recording.
4.If you select the Line-In to be the recording device. On the display, a recording Line-In file is generated and placed in the folder name of [/LINEIN.DIR/]. The recording file name sequence starts at [LINE0001.WAV], then [LINE0002.WAV], and so forth.
5.If you select the built-in Microphone to be the recording device. On the display, a recording Microphone file is generated and placed in the folder name of [/MICIN.DIR/]. The recording file name sequence starts at [MIC00001.WAV], then [MIC00002.WAV], and so forth.
6.Press the PLAY-PAUSE/PWR ON button to pause the recording, and press the
PLAY-PAUSE/PWR ON button again to continue.
7.Press the A-B/REC button again to stop the recording and the display will return to the VOICE mode screen.
| | Sample rate | Channels | 512MB | 1GB |
| | | | | |
| Line-In Record | 8 KHz | 2(stereo) | 16 hrs | 32 hrs |
| | | | |
| 16 KHz | 2(stereo) | 8 hrs | 16 hrs |
| |
| | | | | |
| | 32 KHz | 2(stereo) | 4 hrs | 8 hrs |
| | | | | |