Heat Controller VMH24SB-1 Injury Electric shock or fire, Regularly, Harm your health, Product

Page 4

Safety Precautions

Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly so that there is no force pulling the cable from the connection terminals.

•Improper or loose connections can cause heat generation or fire.

Safely dispose of packing materials,

Make sure to check that the power cable

sharp objects (nails), plastic bags,

plug is not dirty, loose or broken and

batteries, etc. after installation or service.

then only insert the plug completely.

• Children may play with them and cause

• Dirty, loose or broken power plug can cause

injury.

electric shock or fire.

Please use the correct refrigerant type specified for the product. Please read the label on the product.

• Incorrect refrigerant used can prevent the

normal operation of the unit.

Do not place a heater or other heating

appliances near the power cable.

• There is risk of fire and electric shock.

Don't use a power cord, a plug or a loose socket which is damaged.

•Otherwise it may cause a fire or electrical shock.

Do not allow water to run into electric parts. Install the unit away from water sources.

•There is risk of fire, failure of the product, or electric shock.

Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out

•There is risk of electric shock or fire.

Do not store or use or even allow flammable gas or combustibles near the product.

•There is risk of fire.

Do not use the product in a tightly closed

space for a long time. Ventilate the room

regularly.

• Oxygen deficiency could occur and hence

harm your health.

Do not open the front grille of the product

If strange sounds, smell or smoke comes

during operation. (Do not touch the

from product.Immediately turn the breaker

electrostatic filter, if the unit is so equipped.)

off or disconnect the power supply cable.

• There is risk of physical injury, electric shock,

• There is risk of electric shock or fire.

or product failure.

 

Ventilate the product room from time to

Turn the main power off and unplug the

time when operating it together with a

unit when cleaning or repairing the

stove, or heating element etc.

product.

• Oxygen deficiency can occur and hence harm

• There is risk of electric shock.

your health.

 

Take care to ensure that nobody

Take care to ensure that power cable

especially kids could step on or fall onto

could not be pulled out or damaged

the outdoor unit.

during operation.

• This could result in personal injury and

• There is risk of fire or electric shock.

product damage.

 

When the product is not to be used for a long time, disconnect the power supply plug or turn off the breaker.

•There is risk of product damage or failure, or unintended operation.

Do not place ANYTHING on the power cable.

•There is risk of fire or electric shock.

Do not plug or unplug the power supply plug to turn the unit ON/OFF .

•There is risk of fire or electric shock.

When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.

•Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

Two or more people must lift and transport the product.

•Avoid personal injury.

Keep level even when installing the product.

•To avoid vibration or noise.

Do not install the product where it will be exposed to sea wind (salt spray) directly.

•It may cause corrosion on the product.

Do not install the product where the noise or hot air from the outdoor unit could damage or disturb the neighbor.

•It may cause a problem for your neighbors and hence dispute.

Install the drain hose to ensure that the condensed water is drained away properly.

•A bad connection may cause water leakage.

Always check for gas (refrigerant) leakage after installation or repair of product.

•Low refrigerant levels may cause failure of product.

4Room Air Conditioner

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Heat CONTROLLER, INC Table of Contents Before using it again Product by yourselfAge It may cause product to fallDo not place Anything on the power cable Keep level even when installing the productInjury Electric shock or fire RegularlyInstalling the product Uninstalling itHealth issues Water etcElectrical Safety Symbols used in this ManualTemporary Use of an Adapter Never use the appliance with a broken adapterProduct Introduction Indoor UnitsOperation Indication Lamps Outdoor UnitHow to insert the Batteries Wireless Remote Controller MaintenanceSignal receiver is inside the unit Operating InstructionsWireless Remote Controller ENERGY-SAVING Cooling Mode Button Used to save EnergyNd F Button Cooling Model , Heat Pump ModelOperation Mode Open the door of the remote controller and pressTurn the unit on Unit will respond with a beepHealthy Dehumidification Operation TemperatureAuto Changeover Operation Auto Clean Jet Cool/Heat OperationForced operation Energy-Saving Cooling ModeHeat pump Model Sleep Mode Setting the Current TimeTimer Setting Cooling mode or healthy dehumidification modeVertical / Horizontal Airflow Direction Control Optional AgainMaintenance and Service Indoor UnitError Display LED Check Point Once Indoor pipe temperature thermistor open/shortOperation Tips Self-Diagnosis FunctionTroubleshooting Tips! Save time and money Heat CONTROLLER, INC

VMH09SB-1, VMH18SB-1, VMH12SB-1, VMH24SB-1 specifications

The Heat Controller VMH series, featuring the VMH12SB-1, VMH09SB-1, VMH24SB-1, and VMH18SB-1 models, represents a significant advancement in heating and cooling technology. These models are crafted to cater to diverse climate control needs, making them ideal for both residential and commercial settings.

One of the standout features across the VMH series is the variable speed inverter technology. This innovative approach allows the systems to adjust their cooling and heating output based on the room’s current temperature, leading to more efficient energy consumption and consistent comfort levels. Instead of frequently cycling on and off, these units operate at varying speeds, ensuring they maintain the desired temperature with minimal energy use.

Users can expect a high SEER (Seasonal Energy Efficiency Ratio) rating, particularly with the VMH24SB-1 model, which boasts efficiencies that can significantly reduce electric bills. This is not only beneficial for pocketbooks but also for reducing the carbon footprint, as these units utilize eco-friendly refrigerants that comply with the latest environmental regulations.

The VMH series is also equipped with a user-friendly digital thermostat, providing precise temperature control. Some models even come with remote control capabilities, allowing users to adjust settings from the comfort of their couch or while out of the house. This smart feature offers the convenience of programming schedules and settings that suit individual lifestyles.

Regarding installation, the VMH models are designed to be unobtrusive, with sleek and modern designs that fit seamlessly into various decors. The units are compact and come with flexible installation options, making them suitable for smaller living spaces as well as larger areas.

Moreover, the series includes a robust filtration system that improves indoor air quality by trapping dust, allergens, and other contaminants. This focus on air purification is essential for creating a healthier living environment, particularly for individuals with respiratory conditions.

In summary, the Heat Controller VMH12SB-1, VMH09SB-1, VMH24SB-1, and VMH18SB-1 units provide a blend of efficiency, comfort, and convenience. With their advanced inverter technology, high energy efficiency ratings, and smart features, these systems are designed to meet the demands of modern living while contributing positively to the environment. Whether for heating or cooling, the VMH series stands as a reliable choice for achieving optimal indoor climate control.
Top Page Image Contents