Toshiba SD-P90DTSE owner manual Connecting to a TV or audio system, Connections

Connections

Connecting to a TV or audio system

You can enjoy various disks by connecting the player to your TV or an audio system.

For details of output sound, see 41 .

Connecting to a TV

Signal flow

To AV OUT

			To audio	(red)
		Audio/video			TV or monitor with
			inputs
				(white)	audio/video inputs
		cable (supplied)
• Make the following setting.			To video	(yellow)
On-screen display	Select:	Page	input
“Audio Out Select”	“Analog 2ch”	46
		49

Notes

•Refer to the owner’s manual of the connected TV as well.

•When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

•Connect the player directly to your TV. If you connect the player to a VTR, TV/VTR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.

•When an NTSC disc is played, the AV OUT jack outputs NTSC signal to a connected TV.

To select AV mode of the player

Press MODE button on the player.

Each time the button is pressed, the

LCD will change as below.

NORMAL

AV-OUT

AV-IN

NORMAL:	Outputs video and audio to the LCD
	of the player only.
AV-OUT:	Select this to output to an external device
	such as a TV connected to the player.
AV-IN:	Inputs video and audio from an
	external device such as a VCR
	connected to the LCD of the player,
	thus allowing you to view video on
	the LCD of the player.
DTV:	Select this to watch DIGITAL TV.

Note

•To view disc playback on the LCD of the player, select “NORMAL”.

DTV

54

07SD-P90DTSE_E_EU_P53-61 54 07/3/23, 11:14